Agricultural Engineering, Volume 46

PROPERTIES OF MULTICOMPONENT BIOFUEL BLENDS, CONTAINING RAPESEED OIL BUTYL ESTERS, BIOBUTANOL AND FOSSIL DIESEL FUEL

Irina Kazanceva, Eglė Sendžikienė, Milda Gumbytė, Kiril Kazancev
Aleksandro Stulginskio university

Abstract

Chemical and physical properties (density, kinematic viscosity, flash point, copper strip corrosion, calorific value) of multicomponent biofuel blends, containing rapeseed oil butyl or methyl esters, biobutanol and fossil diesel fuel are discussed in this paper. Ester, water and partial glycerides contents were determinated in multicomponent biofuel blends. These properties were compared with the same properties of pure biodiesel (rapeseed oil butyl and methyl esters) and pure diesel fuel. As there are no standards for blends fuel, containing more than 7  of biocomponents, that is why, density and viscosity were evaluated according standards EN 14214 and EN 590.
It is determined that the addition of butanol and rapeseed oil butyl esters should improve the cold flow properties, such as cloud point and cold filter plugging point.
As rapeseed oil butyl esters were produced from high acidity rapeseed oil (4%), much attention was deviated for oxidation stability and acidity of pure rapeseed oil butylesters and it blends with butanol and diesel fuel.

Keyword(s): Rapeseed oil butyl esters, rapeseed oil methyl esters, properties, cold flow properties, oxidation stability, acidity.


References

Atabani A.E., Silitonga A.S., Badruddin I.A., Mahlia T.M.I., Masjuki H.H., Mekhilef S. 2012. A comprehensive review on biodiesel as an alternative energy resource and its characteristics. Renewable and Sustainable Energy Reviews, 16 (4), 2070-2093. DOI: 10.1016/j.rser.2012.01.003.

Bouaid A., El boulifi N., Hahati K., Martinez M., Aracil J. 2014. Biodiesel production from biobutanol. Improvement of cold flow properties. Chemical Engineering Journal, 238, 234–241. DOI: 10.1016/j.cej.2013.10.022.

Fjerbaek L., Christensen K.V., Norddahl B. 2009. A Review of the Current State of Biodiesel.

Production Using Enzymatic Transesterification. Biotechnology and Bioengineering, 102 (5), 1298-1315. DOI: 10.1002/bit.22256

Karavalakis G., Stournas S. and Karonis D. 2010. Evaluation of the oxidation stability of diesel/biodiesel blends. Fuel, 89 (9), 2483-2489. DOI: 10.1016/j.fuel.2010.03.041

Knothe G., Steidley K.R. 2007. Kinematic viscosity of biodiesel components (fatty acid alkyl esters) and related compounds at low temperatures. Fuel, 86 (16), 2560-2567. DOI: 10.1016/j.fuel.2007.02.006

Kumar M., Gayen K. 2011. Developments in biobutanol production: new insights. Appl. Energy, 22, 1999–2012. DOI: 10.1016/j.apenergy.2010.12.055

Makarevičienė V., Matijošius J., Pukalskas S., Vėgneris R., Kazanceva I., Kazancev K. 2013. The exploitation and environmental characteristics of diesel fuel containing rapeseed butyl esters. Transport, 28(2), 158-165. DOI: 10.3846/16484142.2013.801364

Pullen J., Saeed K. 2014. Experimental study of the factors affecting the oxidation stability of biodiesel FAME fuels. Fuel Processing Technology 125, 223–235. DOI: 10.1016/j.fuproc.2014.03.032

Tan T., Lu J., Nie K., Deng L., Wang F. 2010. Biodiesel production with immobilized lipase: A review. Biotechnology advances, 28, 628-634. DOI: 10.1016/j.biotechadv.2010.05.012


Full Text: PDF



DOI: http://dx.doi.org/10.15544/ageng.2014.002

Refbacks

  • There are currently no refbacks.
1963 views

Agricultural Engineering ISSN 1392-1134 / eISSN 2345-0371

This journal is published under the terms of the Creative Commons Attribution-Noncommercial 3.0 Unported License. Responsible editor: Dr A. Žunda.